$1,399.00
Two independent channels for instrument and z. B. high quality condenser microphones.
Channel 2 provides 48-V phantom power.
For channel 1, 9 V phantom power can be switched on in order to supply your pickup system with the required voltage.
A customized 8“ twin cone loudspeaker and 60 watts RMS output power, sufficient to dynamically and powerfully amplify your instrument in every rehearsal room and on club stages.
The effect can be added to each channel via a PAN control.
Recommended are: Acoustic guitar, voice, wind instruments, mandolins, oud, traditional Chinese instruments, mouth harp, but also cellos and electrical instruments…
The weight includes: Amplifier, bag, cable, user manual
Channel 1
6.3 mm (1/4”) input jack socket
as high impedance line input stage with pad (high/low
attenuation) 9 V phantom power
and gain control
combined XLR/6.3 mm (1/4”) input jack socket as high quality line or balanced microphone input stage 48 V, gain control
three band tone controls for channel 1 and
two band tone controls for channel 2
‘mid-cut-treble-boost’-filter
2 x reverb, delay, chorus
60W / 4 ohms, dynamic control
8” (200 mm) twin cone speaker
headphones, line out, switchable DI-out,
external effect loop via send and
return, footswitch, aux in
(internal/external effect on/off )
260 mm x 325 mm x 235 mm
(10.20“ x 12.80“ x 9.25“), HxWxD
7,3 kg (16,09 lbs)
Share This Item


